This mini mount kit consists of a baseplate that is through-bolted to your transom and a mount that replaces the clamp on your EP Carry. Once the baseplate is installed, attaching the motor to the boat takes seconds; hook the mount to the lower pin and insert the upper pin and lock ring. This mount was used on Sunnyside this season including 100 nm of the Salish 100. Here are the advantages:
- Motors with the mini mount can be 4 inches shorter. So, for example, an existing short shaft motor can be made to work on a long shaft boat. Swapping mounts is easy.*
- The Mini Mount is more secure than any clamp; the motor can’t shift or loosen over time. It also positions the motor in the same spot every time.
- The Mini Mount system reduces the total weight of an EP Carry by around 2 lbs. Perfect for boats with low buoyancy in the stern.
- A Mini Mount EP Carry is shorter and easier to store.
* Changing your EP Cary motor from a clamp-on to the mini mount is a snap; just remove the tilt pin and pivot bolt, swap mounts, and re-assemble. It is a 3-4 minute operation and can be reversed as frequently as you like. And remember, because the mini mount adds 4 inches to the shaft immersion, a short shaft motor with a standard clamp mount can also be used on a long shaft boat fitted with the mini mount, allowing one motor to serve both boats.
Kit includes the mini mount, baseplate, spacers, 1/4″ thru bolts, washers and locknuts. The mini mount should be positioned even with the top of your transom for the motor head to clear when raised.







