Our batteries work with all EP Carry motors.
Showing all 10 results
The EP Carry 1 hour battery is our lightest power option for ship-to-shore service. Weighing in at just 6.4 lb ,it provides one hour of runtime at full throttle. This battery comes with no state of charge monitor but owners report 2-3 days of ship to shore service on a charge. So recharging each night…
Works with K2 Energy brand 9.6Ah through 11.25Ah batteries we shipped since 2017. For our new 3-hr, 30Ah battery see our Victron charger instead. This charger is shipped with our newer 2-pin snap lock connector adapter. If you have an older 3-pin connector format on your battery, contact us- we still have a limited supply…
This EP Carry 3 hour battery offers the most range for the lowest cost and weight offered by any small outboard manufacturer. A Bluetooth connection reports the battery state of charge so no separate monitor is required. Includes a buoyant soft case with carry straps and a three-foot snap-lock connector cord. If you need additional…
This EP Carry 24V battery charger is a Victron Blue Smart IP65 charger fitted with the EP Carry plug-and-play connector for straightforward setup. Bluetooth support lets you monitor the charging process from a compatible phone or tablet. EP Carry 1-hour battery: approximately 2-1/4 hours from a fully discharged state (0% SOC). EP Carry 3-hour battery:…
This kit includes a 3 ft cord for connecting a motor to our 3-hr battery or an owner-supplied battery. It can also be used on our 1-hr battery if you need a little more cord length. This cord has 5/16″ lugs, a fuse and a 2-pin waterproof snap lock connector with cap. It also includes…
This simple-to-install marinized dongle wirelessly reports your battery’s state of charge, remaining run time and more on your IOS or Android phone or tablet. This monitor contains a high quality Coulomb counter device by Thornwave Labs called PowerMon. EP Carry’s version is over-molded and connections are simplified for simple installation and marinized performance. This meter…
This kit boosts a 12V battery voltage up to 24V so you can have full power performance from 12V batteries. Works with all EP Carry motors shipped since 2017. Motors with the latest firmware update (Gen 2) will operate from 12V portable power centers that can provide 10A without this kit, but only at ~…
2-pin format waterproof connector cables fit the smaller 1-hr batteries supplied by EP Carry. For other batteries, including our new 3-hr battery, choose the 3′ battery cord that has a fuse and larger lugs. If your connector sockets are not all a shiny gold color, first clean them with nothing more aggressive than a q-tip. …
Each cable provides 3 ft of cable extension. Up to two extensions can be used to power your EP Carry without impacting motor performance. If you have a motor with a 3-pin connector, this extension will require you to update your motor with our optional 3-pin to 2-pin conversion kit.
Older EP Carry motors, batteries and chargers have a 3-pin connector format that has now been replaced with a 2-pin style. Because we can no longer obtain 3-pin replacement cords, this kit is required if your battery cord needs replacing. Includes a motor connector, battery cord connector and a charger adapter. Installation: Motor and battery…